Ok so i took this and copy and pasted it into the unistim.conf dle and; everything out but this. [general] port=5000; UDP port;keepalive=120; in seconds, default = 120;public_ip=; if asterisk is behind a nat, specify your public ip [nortel201]; this is the name of the phone, we will use it shortly device=006038bb7323; this is where you must have your mac address rtp_port=10000 rtp_method=0 status_method=1; If you don't see status text, try 1, default = 0 contrast=8; define the contrast of the LCD. From 0 to 15.

Installing FreePBX 13 on CentOS 7. Install Asterisk Soundfiles. I'm using a cloud server where installed asterisk with freepbx and i use voip phone for connect. FreePBX can be installed manually or as part of the pre-configured FreePBX Distro that includes the system OS, Asterisk, FreePBX GUI and assorted dependencies. IAX™ (Inter-Asterisk eXchange) Jingle/XMPP MGCP (Media Gateway Control Protocol SCCP (Cisco® Skinny®) SIP (Session Initiation Protocol) UNIStim.

Default = 8 dateformat=1 timeformat=1 country=us ringvolume=3 ringstyle=2 callerid='name'; this is what you want others to see the extn 201 is from free pbx, so we will have to put it in ourselves context=default mailbox=201@internal linelabel='name ';this line is what will show on the phone extension=line line =>102; this is important this is the identity of the nortel itself bookmark=name@exten bookmark=name@exten bookmark=name@exten after all fo this is in there it appears as though the phone registers to the piaf box as it does not say it is trying to reach the server anymore. But the time and date are wrong, no dial tone, and when i choose to have my IVR goto this custom extension, it goes to a fast busy. I do not understand what is going on here. It all seems correct and seems as though the phone is connected just fine since i am not getting a message saying otherwise. Use Google to search site bxinaflash.com unistim.conf This has been discussed many times I have many i2004s running and it all works great. Here are a couple of quickies: 1.

Go to the asterisk CLI (asterisk -rvv from the shell prompt) and type help unistim. Do you get the help list? If not, unistim was not installed properly. Is the PBX behind NAT? If so, you need the publicip entry. Did you make an entry in iptables to open port 5000 udp?

Test the phone by entering the shell command: disable-iptables. If it works, you then need to open port 5000 for it to work. Of course, I presume you have a custom extension in FreePBX to match your line? Again, search the forum -- there is lots of discussion on unistim and the conf file. Otherwise, your file looks fine. This is exactly what i typed. Word for word.

Wget tar xvjf chan_unistim-1.0.0.5f.tar.bz2 && cd chan_unistim-1.0.0.5f make && make install && make config so after this it should be installed correctly? From everything i read this would be correct. I then went and edited the /etc/asterisk/unistim.conf file with the above mentioned settings and i get the phone to stop trying to register. It connects, does not get the correct time and will not get a dial tone. The ivr is pointing to a custom context extension created and when that option is chosen i get a fast busy signal. I can only call inside extensions. No feature codes or outside dialing.

All i get is a system message saying goodbye and hanging up on me. And here is a copy of my configuration. Anyone who has got this to work. Please post a scrub' copy of your config.

[general] port=5000; UDP port;keepalive=120; in seconds, default = 120;public_ip=; if asterisk is behind a nat, specify your public ip disallow=all allow-ulaw allow=alaw allow=gsm [servicedept]; this is the name of the phone, we will use it shortly device=006038b65fa1; this is where you must have your mac address rtp_port=10000 rtp_method=0 autoprovisioning=yes context=default status_method=1; If you don't see status text, try 1, default = 0 contrast=8; define the contrast of the LCD. From 0 to 15. Default = 8 dateformat=0 timeformat=2 country=us ringvolume=4 ringstyle=2 callerid='name'; this is what you want others to see the extn 201 is from free pbx, so we will have to$ context=default linelabel='name ';this line is what will show on the phone extension=line line =>102; this is important this is the identity of the nortel itself exten =>1003,1,Dial(). Forum discussion contents reflect the views of individual participants who remain solely responsible for posted discussion content. Forum owner bears no responsibility for accuracy of participant comments and bears no legal liability for posted discussion content. By using, accessing, or advertising on this site, you agree to waive all legal claims against the following entities and members: PBX in a Flash Development Team, Incredible PBX Development Team, and Ward Mundy & Associates, LLC.

Phantasy Star Zero Patch Itau. Asterisk速, Digium速 and Asterisk logo are registered trademarks of Digium, Inc. FreePBX速 is a registered trademark of Sangoma Technologies, Inc.

Forum content is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Free Download Program Program Facut Stampile Rotunde Obituaries.